osop www.vishay.com vishay dale thin film revision: 03-mar-17 1 document number: 60002 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 molded, 25 mil pitch, dual-in-line thin film resistor, surface mount network osop series resistor networ ks feature a space saving 25 mil lead pitch versus the current 50 mil pi tch standard. this allows users to reduce board space more than 50 % over current standards. the os op series features 16, 20, and 24 pin variations with isolated and last pin common schematics. custom schematics and resistor values are also available, consult factory. schematic features ? 0.068" (1.73 mm) maximum seated height ? rugged molded case construction with no internal solder ? jedec ? mo-137 variation ab = 16 pin, ad = 20 pin, ae = 24 pin ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about parts that are ? rohs-compliant and / or parts th at are non rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information / tables in this datasheet for details typical performance note ? consult factory for additional values and schematics o s op 16 b o s op 20 a o s op 24 c o s op 16 e o s op 20 d o s op 24 f r1 r12 r11 r10 r9 r8 r7 r6 r5 r4 r3 r2 absolute tracking tcr 25 5 absolute ratio tol. 0.1 0.05 standard resistance offering (r 1 =) 500 ? 10 k ? 1 k ? 20 k ? 2 k ? 50 k ? 5 k ? 100 k ? available available standard electrical specifications test specifications conditions material passivated nichrome - pin / lead number 16, 20, 24 - resistance range 500 ? to 100 k ? per resistor - tcr: absolute 25 ppm/c -55 c to +125 c tcr: tracking 5 ppm/c -55 c to +125 c tolerance: absolute 0.1 % to 1 % +25 c tolerance: ratio 0.025 % to 0.5 % +25 c power rating: resistor 100 mw maximum at +70 c power rating : package 400 mw maximum at +70 c stability: absolute ? r 0.05 % 2000 h at +70 c stability: ratio ? r 0.015 % 2000 h at +70 c voltage coefficient < 0.1 ppm/v (typical) - working voltage 100 v max. not to exceed - operating temperature range -55 c to +125 c - storage temperature range -55 c to +150 c - noise < -30 db - thermal emf 0.08 v/c - shelf life stability: absolute ? r 0.01 % 1 year at +25 c shelf life stability: ratio ? r 0.002 % 1 year at +25 c p x r
osop www.vishay.com vishay dale thin film revision: 03-mar-17 2 document number: 60002 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) tolerance available 1k and up (2) preferred packaging code dimensions and imprinting in inches and millimeters dimension inches millimeters a 16 pin 0.193 0.003 4.90 20, 24 pin 0.341 0.003 8.66 b 0.154 3.91 c 0.237 6.02 d 0.025 0.635 e 0.010 0.002 0.25 0.05 f 0.062 1.58 g 0.068 1.73 h 0.010 0.002 0.25 0.05 i 0.025 0.64 j 16 pin 0.009 0.23 20 pin 0.057 1.47 24 pin 0.057 1.47 mechanical specifications resistive element passivated nichrome substrate material silicon body molded epoxy terminals copper alloy lead (pb)-free option 100 % matte tin tin lead option sn90 tin lead and lead (pb)-free finish plated global part number information new global part numbering: osopa1002buf global model (4 or 5 digits) schematic resistance tolerance and ratio tolerance packaging osop (tin lead) osopt (lead (pb)-free) (e3) a = 20 pin 10 isolated resistors b = 16 pin 8 isolated resistors c = 24 pin 12 isolated resistors d = 20 pin 19 resistors pin 20 common e = 16 pin 15 resistors pin 16 common f = 24 pin 23 resistors pin 24 common first 3 digits are significant figures and the last digit specifies the number of zeroes to follow. example: 1002 = 10k 1003 = 100k abs. tol. ? ? a = 0.1 % ? b = 0.1 % ? c = 0.25 % ? d = 0.5 % ? f = 1 % ? z = 0.1 % (1) ratio ? ? 0.05 % ? 0.1 % ? 0.1 % ? 0.1 % ? 0.5 % ? 0.025 % tape and reel ? t0 = 100 min., 100 mult ? t1 = 1000 min., 1000 mult (2) ? t3 = 300 min., 300 mult ? t5 = 500 min., 500 mult ? tf = full reel 2500 ? ts = 100 min., 1 mult ? ? uf = tubed historical part number example: osopa5000b (for reference purposes only) osop a 5000 b series schematic resistance tolerance and ratio tolerance j a b d h e f g c i part number marking date code logo pin 1 locator pta1003at1 o s o pa1002buf o s o
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
